Series:
Intellpower
TX3000
Application
Ideal for small and medium sized electrical equipments
operated by 3-phase AC induction motors, such as
air-conditioners, industrial washing machines,
industrial fans, blowers, centrifugal pumps etc.
Description
The TX3000 employs state of the art motor controller technology
that manages the magnetic field of the AC motors. Recent
series of the TX3000 have been improved with advanced
features commonly used in that of the heavy duty TX2000
range.
Performance
Characteristics:
Automatic load sensing mechanism
TX3000
is powered by Intellpower processor. It provides constant
circuit intervention technique by reading the actual work
load of the motor. When the actual work load is lower
than the rated load; TX3000 will reduce the power (voltage
and current) that are being fed to the motor. Saving of
more than 70% is achievable where the motor is running
at no load.
The sensing circuit measures and compares the voltage
and current waveform of the motor. The Load sensing mechanism
operates continuously and it takes readings once every
three sine-wave cycles.
Digital
load condition sensor
The Digital sensor operates on a closed-loop feedback
system. Load condition of a particular application changes
all the time. Accurate measurement is essential to ensure
optimum management of the desired load condition.
Solid
State Soft-Start & Soft Stop
Soft-Start & Soft-Stop
allows reduces peak demand and enhance motor’s life span
resulting from high inrush current induced wear and
tear.
TX3000
provides a reliable and
controlled release of power to the motor, allows
step-less acceleration and deceleration which enable
more frequent starting and stopping
This increases protection to the motor
and peripherals by reducing high in-rush load, backlash,
V-belt stress, excessive noise and vibration. All in
all, the TX3P series is sure to extend motor life as
damage to winding and bearing is reduced.
|
Product Use |
General Purpose
AC Induction Motor Controller |
|
Application
Type |
Single
Direct2Load (Optional Multiple Load) |
|
Input Voltage
Range |
3-phase 208 -
480 VAC |
|
Frequency
Range |
50Hz or 60Hz
Auto-Detect |
|
Soft-Start
|
Owner Managed 1
to 60 seconds |
|
Soft-Stop
|
Owner Managed 1
to 60 seconds |
|
Delay to ON
Mode |
Owner Managed 1
to 60 seconds |
|
Delay to SAVE
Mode |
Owner Managed 5
to 60 seconds |
|
Cooling Method |
Thermal Heat
Sinks |
|
Bypass Switch |
Easy Access
Front Panel |
|
Thermal
Protection |
OPTIONAL |
|
Remote
Start/Stop Switch |
OPTIONAL
|
|
Enclosure Type |
NEMA 3R |
|
Ambient
Humidity & Temperature |
1.
Operating : 5% to 95% Non-condensing |
|
2. Operating
: -10oF to +125oF |
|
3. Storage
: - 40oF to +125oF |
|
Power
Consumption |
4W @ standby
mode |
Ordering
Information
|
Model |
Input |
Rated
Output |
|
TX3105 |
3f
208/277VAC |
5HP (3.75KW) |
|
TX3110 |
3f
208/277VAC |
10HP (7.5KW) |
|
TX3120 |
3f
208/277VAC |
20HP (15KW) |
|
TX3130 |
3f
208/277VAC |
30HP (22KW) |
|
TX3250 |
3f
380/415VAC |
5HP (3.7KW) |
|
TX3210 |
3f
380/415VAC |
10HP (7.5KW) |
|
TX3220 |
3f
380/415VAC |
20HP (15KW) |
|
TX3230 |
3f
380/415VAC |
30HP (22KW) |
|
TX3P-M010 |
3f
208/277VAC |
10A |
|
TX3P-M020 |
3f
208/277VAC |
20A |
|
TX3P-M030 |
3f
208/277VAC |
30A |
|
TX3P-M060 |
3f
360/480VAC |
60A |
|
TX3P-M100 |
3f
360/480VAC |
100A |
|
TX3P-M150 |
3f
360/480VAC |
150A |
|
TX3P-M200 |
3f
500VAC |
200A |
|
TX3P-M250 |
3f
500VAC |
250A |
|
TX3P-M500 |
3f
500VAC |
500A |
